首页
产品中心
关于我们
新闻咨询
解决方案
案例展示
联系我们
QQ
热线
微信
返回顶部
工厂车间空调

解决方案 >  工厂车间空调

工厂车间空调

服装生产车间空调解决方案

时间:2019-03-25 100
 

针对服装生产车间的空调解决方案,服装生产车间的特点为生产工作场所,服装生产车间有大量发热设备,服装生产车间内生产人员多。根据服装生产车间的特点,空调选型推荐如下:CB-V065机型。
This is a solution of A/C for a clothing workshop. The characteristic of the clothing workshop is the production of workplace, and there is a small amount of equipment. Production personnel are not too much. According to the characteristics of the space for the clothing workshop, the selection of model is recommended as CB-V065.
经济效益评估:(Economic Evaluation)
  • 该印刷厂需安装空调面积总计400平方米左右,有大量发热设备和生产人员,对温湿控制及节能有要求,依据实际情况每平米所需制冷量平均按450W计算,总需求的180KW制冷量。
The total area is of about 400 square meters for the clothing workshop, and there is a large amount of heat source, and it requires the temperature and humidity control and energy saving features. Required cooling capacity per square meter on average calculated based on the actual situation according to 450W, the total demand for cooling capacity is of 180KW.
  • 要满足该项目180KW的制冷量,需使用CB-V065机组3套装机。
To meet the cooling capacity of 180KW, this project is needed to use four sets of unit (CB-V065).
  • 经济效益对比估算:传统空调满足180KW制冷量的输入功率至少为67.5KW左右,而CB-V065机组3套主机的输入功率合计为43.875KW,主机部分省电35%,全年共计节省电费4.5万元以上。(按1年运行8个月,1月运行30天,1天运行8小时,用电按1元1度计算)
Comparison of economic benefit estimation: the traditional air-conditioning input power (180KW cooling capacity) is at least about 67.5KW, and the CB-V065 input power per set is of 14.625KW. The energy saving is up to 35%. The annual saving is more than 45000 CNY. (According to 8 months per year, 30 days per month, 8 hours per day of operation, electricity by 1 CNY/1 degree calculation)
0.173191s