首页
产品中心
关于我们
新闻咨询
解决方案
案例展示
下载中心
合作加盟
联系我们
QQ
热线
微信
返回顶部
工厂车间空调

解决方案 >  工厂车间空调

工厂车间空调

木材加工厂空调解决方案

时间:2019-03-25 100
 

针对木材加工厂的空调解决方案,木材加工厂的特点为生产工作场所,木材加工厂有少量发热设备,木材加工厂内生产人员不会太多。根据木材加工厂的特点,空调选型推荐如下:CB-S029机型。
This is a solution of A/C for a wood plant. The characteristic of the wood plant is the production of workplace, and there is a small amount of equipment. Production personnel are not too much. According to the characteristics of the space for the wood plant, the selection of model is recommended as CB-S029.
经济效益评估:(Economic Evaluation)
  • 该木材加工厂需安装空调面积总计400平方米左右,有少量发热设备,对温湿控制及节能有要求,依据实际情况每平米所需制冷量平均按350W计算,总需求的140KW制冷量。
The total area is of about 400 square meters for the wood plant, and there is a small amount of heat source, and it requires the temperature and humidity control and energy saving features. Required cooling capacity per square meter on average calculated based on the actual situation according to 350W, the total demand for cooling capacity is of 140KW.
  • 要满足该项目140KW的制冷量,需使用CB-S029机组5套装机。
To meet the cooling capacity of 140KW, this project is needed to use five sets of unit (CB-S029).
  • 经济效益对比:传统空调满足140KW制冷量的输入功率至少为55KW左右,而CB-S029机组5套主机的输入功率合计为32KW,主机部分省电42%,全年共计节省电费4.4万元以上。(按1年运行8个月,1月运行30天,1天运行8小时,用电按1元1度计算)
Comparison of economic benefits: the traditional air-conditioning input power (140KW cooling capacity) is at least about 55KW, and the CB-S029 input power per set is of 6.4KW. The energy saving is up to 42%. The annual saving is more than 44000 CNY. (According to 8 months per year, 30 days per month, 8 hours per day of operation, electricity by 1 CNY/1 degree calculation)