首页
产品中心
关于我们
新闻咨询
解决方案
案例展示
下载中心
合作加盟
联系我们
QQ
热线
微信
返回顶部
精密空调

解决方案 >  精密空调

精密空调

办公室空调解决方案

时间:2019-03-25 100
 

针对办公室的空调解决方案,办公室的特点为工作场所,办公室有发热设备,办公室内有人员。根据办公室的特点及热源,空调选型推荐如下:CB-S021机型。
This is a solution of A/C for an office. The characteristic of the office is the workplace, and there is a large amount of equipment. There are working personnel inside the office. According to the characteristics of the space for the office and heat source, the selection of model is recommended as CB-S021.
经济效益评估:(Economic Evaluation)
  • 该办公室需安装空调面积总计300平方米左右,有发热源,对温湿控制及节能和噪音降低有要求,依据实际情况每平米所需制冷量平均按350W计算,总需求的105KW制冷量。
The total area is of about 300 square meters for the wood plant, and there is a large amount of heat source, and it requires the temperature and humidity control and energy saving and noise reduction features. Required cooling capacity per square meter on average calculated based on the actual situation according to 350W, the total demand for cooling capacity is of 105KW.
  • 要满足该项目105KW的制冷量,需使用CB-S021机组6套装机。
To meet the cooling capacity of 105KW, this project is needed to use six sets of unit (CB-S021).
  • 经济效益对比:传统空调满足105KW制冷量的输入功率至少为40KW左右,而CB-S021机组6套主机的输入功率合计为24KW,主机部分省电40%,全年共计节省电费3万元以上。(按1年运行8个月,1月运行30天,1天运行8小时,用电按1元1度计算)
Comparison of economic benefits: the traditional air-conditioning input power (105KW cooling capacity) is at least about 40KW, and the CB-S021 input power per set is of 4KW. The energy saving is up to 40%. The annual saving is more than 30000 CNY. (According to 8 months per year, 30 days per month, 8 hours per day of operation, electricity by 1 CNY/1 degree calculation)